Specification
H30P drilling rig is used to make vertical holes in the ground by using a rotary scrubber (right circuit) with a pump drill rig mounted on a frame.
H30P rig is also used to make vertical holes in the ground using auger drilling screw using a dry casing, to extract ore with a bailer or drill pipe and chisel work.
H30P drill is founded on the chassis of the trailer, it makes the PRONAR mobile unit suitable for performing a variety of hydrogeological drilling.
Rig mechanisms are driven by an independent diesel engine.
It is also possible to complete a rig according to individual needs of the machine.
Technical data
Vertival rig |
type |
H30p |
||
|
Max drilling width (dry / witch scrubber) |
mm |
240/170 |
||
|
Length of the rod |
m |
3 |
||
|
Max. drilling depth (dry / with scrubber) |
m |
50/100 |
||
|
Rod clamp |
mm |
Ø65÷Ø170 |
||
|
Max. diameter of casing pipes |
mm |
245 |
||
|
Rotary head |
gear |
I |
II |
|
|
Torque |
daNm |
440 |
220 |
|
|
Rotary speed |
rev/min |
50 |
100 |
|
|
Mud pump plunger PPN350 |
||||
|
max. efficiency |
dm3/min |
350 |
||
|
max. pressure |
MPa |
4 |
||
|
guide |
|
|||
|
roatary head travel |
mm |
3700 |
||
|
pull-down force |
kN |
40 |
||
|
pull-up force |
kN |
60 |
||
|
Guide travel |
|
|||
|
travel |
mm |
1200 |
||
|
pull-down force |
kN |
130 |
||
|
pull-up force |
kN |
190 |
||
|
Hydraulic winch |
|
|||
|
Max. line strength |
kN |
45 |
||
|
line diamater / length |
|
Ø16mm / 120m |
||
|
Jerk-line (optional) |
|
|||
|
travel of the device suspended on a rope |
mm |
700 |
550 |
400 |
|
max. device mass |
kg |
600 |
800 |
1000 |
|
Rig width |
2400 mm |
|||
|
Rig mass (with chassis) acceptable total mass |
9800 kg 13290 kg | |||
H30P Rig in working position
H30P Rig in transport position
